Go to TogaWare.com Home Page.
GNU/Linux Desktop Survival Guide
by Graham Williams
Google

Belinos Hardware


Additional 2GB memory was purchased [081006] from Dick Smith for AUD$59 per GB (DDR2 PC5300 667 MHz) and inserted into slots 3 and 4. Process was simple and followed the instructions from the Dell service manual on line. Performance improvement was immediately noticeable.

A 300GB hard drive was added [090701] to the machine. It was salvaged from a external USB drive whose circuit board seemed to have failed--the disk itself was just fine.

A Telstra 3G Wireless Broadband USB was connected. The instructions at http://ubuntuforums.org/showthread.php?t=1147685 (posts number 1 and 7) were followed, and the network manager application then worked with the modem. A key element was that before the process:

$ sudo lsusb
...
Bus 001 Device 009: ID 19d2:2000
...

We then run the command:

$ sudo /usr/sbin/usb_modeswitch -W -c /etc/usb_modeswitch.conf

Then:

$ sudo lsusb
...
Bus 001 Device 009: ID 19d2:0031
...

That is, the :2000 became :0031.


Copyright © 1995-2014 Togaware Pty Ltd
Support further development through the purchase of the PDF version of the book.
Brought to you by Togaware.